ComBus Quick Tester

INVESTIGATE BEFORE YOU INTEGRATE

 

The ComBus Quick tester provides an accurate, measurable way of determining the status of the N2 bus.

Once the inspection and repair work are completed and the N2 bus is working to manufacturer specifications, the chances of an N2 Router installation going in on schedule and without problems or issues are greatly improved. 

Minimize your risk, increase your revenue:

  • Test and verify an N2 bus before installing an S4 router. The ComBus Quick Tester will quickly:
    • Test bus voltages indicating Pass/Fail
    • Count all devices on the bus and identify each for display
    • Work as a Master Controller to check the entire system or segments of the network
  • Require that the facility owner deliver a properly working N2 bus before attempting to install the N2 Router
  • Pick up incremental revenue doing any necessary repair work as part of the project. The ComBus Quick Tester gives you a quick and reliable way to document the need!

 

The S4 Group on their adoption of the ComBus Quick Tester:

"We immediately saw the synergies between this product and installation projects for our S4 Open appliances. The need for a device like this was made clear by the condition of the N2 bus in at our first field test site. It was a disaster! On the first trip we took to the site, we found that the bus was so dirty electrically that we could barely read it and had significant problems with error handling. This caused us to have to rewrite the serial device drivers for the S4 Open appliances to work at the hardware level to be able to do proper error handling. This added considerably to the expense of developing our products and to the painful delays in the product release dates.

The up-side of this experience is that the field test was productive and we were ultimately able to deliver a better product for our customers. Before we made the last trip to the site, the controls contractor's team invested a significant amount of time repairing the N2 buses in the buildings. They found cable damage from construction and renovation projects, broken N2 cables, cables chewed and shorted by rodents (they found a few nests made from insulation), failed N2 field devices causing problems, etc. With careful bidding practices you can turn conditions like this into more revenue from your projects."

 

INVESTIGATE BEFORE YOU INTEGRATE

 

“Investigate before you integrate....”